not charging

[Ed Kellock]

I don't understand what you are suggesting/asking?

Voltage regulator?  Haven't checked it yet.

Kitchen sink drain decided to stop flowing at an inopportune time last
night, thereby ending my car mechanics.

> -----Original Message-----
> From: Bernie Benz [mailto:b.benz at charter.net] 
> Sent: Sunday, September 14, 2008 10:56 AM
> To: Ed Kellock
> Cc: 200q20V mailing list
> Subject: Re: not charging
> 
> 
> Regulator slip ring brushes?
> 
> Bernie
> 
> 
> On Sep 14, 2008, at 9:43 AM, Ed Kellock wrote:
> 
> > I posted about this briefly several days ago in relation to an
> > ignition
> > switch thread... I have a no-charge situation.  I checked the  
> > obvious and
> > then hit the Bentley.  I seem to have a problem with the exciter  
> > circuit.
> > Connections and belt were all tight and good.
> >
> > Exciter circuit amperage was around 20 when spec is 150-185.
> >
> > When I turn on the ignition, the battery light does not 
> come on.  The 
> > antilock light does but goes out almost immediately.
> >
> > Bentley points to IC or exciter wire between alternator and IC.
> >
> > 237k on the clock.
> >
> > Any ideas or helpful hints?
> >
> > Thanks,
> > Ed
> > _______________________________________________
> > 200q20v mailing list	 
http://www.audifans.com/mailman/listinfo/200q20v
> 
>