Heater core replacement question

[Bernie Benz]

No BTDT on core removal, but while in there lube the blower motor  
bushings and replace the motor brushes.
Several times over the past 10 years I’ve posted source and specs on  
these burshes.

Bernie

2
On Feb 2, 2009, at 2:00 PM, rbade12 at aol.com wrote:

> I've got the heater box out of the car and split into it's 2  
> halves. I've got the old leaky core out. I got it out by  
> impatiently cutting the elbows off to get it out of it's opening in  
> the half the elbows fit into. Figure I'd address the insertion of a  
> new core at another time....that's now. The opening in the heater  
> box is too narrow for the elbows to fit through, period. I'm afraid  
> if I force it I'll break the heater box. So, others must have run  
> into this issue. How'd the factory do it, because they had to do it  
> once, how'd you guys do it? Thanks, Bob
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v