motor mounts

[Austin Calise]

John, it isn't too bad the passenger side is harder than the drivers side. To do the drivers side you need remove the front 2 subframe bolts to drop the SF to be able to remove the mount other than that pulling the heat shield on the frame rail and you should be good.
1 17mm nut on the top and 2 15mm nuts iirc on the bottom. You'll want to support the motor under oil pan with piece of wood on  a floor jack.
 
HTH's Austin

--- On Tue, 2/17/09, John Lagnese <jlagnese at massed.net> wrote:
From: John Lagnese <jlagnese at massed.net>
Subject: motor mounts
To: quattro at audifans.com, "'200q20V mailing list'" <200q20v at audifans.com>
Date: Tuesday, February 17, 2009, 12:17 AM

Hi,
I need to replace my two motor mounts on my 91 200 TQ 20V. How much work
am I in for? Any BTDT experiences to be aware of?

John

_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v