1. Re: FW: Ignition Switch Failure Mode (Ben Swann)

Adam Gratz adamgratz at gmail.com
Fri Jul 3 13:51:56 PDT 2009


On Fri, Jul 3, 2009 at 10:45 AM, Adam Gratz <adamgratz at gmail.com> wrote:

> Ben-
>
>
> My ignition switch failed recently causing an intermittent no start. I
> replaced it (PITA) and the unusually high quality oem switch (MADE IN
> CHINA!!!) failed 3 months later. When I pulled it, the spot weld on one of
> the contacts had seperated.
>

I am now quite good at hot-wiring the car.

Aloha,

doc-

PS: Some bored kids broke out the rear passengers side window in the Avant.
Would love for someone to send one my way. Anyone?






>
>>
>>
>> Today's Topics:
>>
>>   1. Re: FW: Ignition Switch Failure Mode (Ben Swann)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Fri, 19 Jun 2009 22:42:29 -0400
>> From: "Ben Swann" <benswann at verizon.net>
>> Subject: Re: FW: Ignition Switch Failure Mode
>> To: <quattro at audifans.com>,     <geraintlloyd_qc at yahoo.ca>,     "'200q20V
>>        mailing list'" <200q20v at audifans.com>
>> Cc: 'Ben Swann' <benswann at verizon.net>
>> Message-ID: <007b01c9f150$c1275d70$0201a8c0 at swansong>
>> Content-Type: text/plain;       charset="iso-8859-1"
>>
>>
>> Actually, they can and do fail in this exact manner.   The cranking
>> terminal can connect
>> allowing the starter to turn enging over, while the
>> ignition/ECU(spark/fuel) portion  of
>> the swich does not enable.  This can be intermittant and often be
>> associated with the
>> switch overheating.  The car often will start fine after cooling down.
>>  Sometimes the
>> ignition portion is disable when cranking, but can "catch" when released
>> to run position
>> and engine can start.  Seen it happen this way on several 5kts.
>>
>> Ben
>>
>> [Date: Fri, 19 Jun 2009 12:41:50 -0500
>> From: Tony Hoffman <auditony at gmail.com>
>> Subject: Re: FW: Ignition Switch Failure Mode
>> To: geraintlloyd_qc at yahoo.ca
>> Cc: quattro at audifans.com, 200q20v at audifans.com
>> Message-ID:
>>        <7bd5cbf00906191041g12cbc260yf5091044a6b3a78b at mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> If all the VAG switches that I've replaced, I've never seen one fail
>> in that mode. I'ts always been no crank, accessories not working, or
>> failure to return from start. Never seen one kill the spark or fuel
>> during cranking.
>>
>> Tony]
>>
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> 200q20v mailing list
>> 200q20v at audifans.com
>> http://www.audifans.com/mailman/listinfo/200q20v
>>
>>
>> End of 200q20v Digest, Vol 68, Issue 20
>> ***************************************
>>
>
>


More information about the 200q20v mailing list