Loosening suspension adjusters

Bernie Benz b.benz at charter.net
Mon Jun 1 11:11:15 PDT 2009


Suspender Adjusters? You putting on weight?

You mean tie rod ends? Long ago I touched mine after removing the tie  
rods. Cleaned up and greased the threads, found a piece of rubber  
tubing to act as a boot and they are always free now.

If you are into DIY alignment, I’ve posted several procedures over  
the years to this list. My latest is a 1/‘09 Tech Article on Audi World.
<http://www.audiworld.com/tech/>

Bernie

On Jun 1, 2009, at 1:04 PM, Kneale Brownson wrote:

> What's the secret to getting adjusters loose on the front and rear
> suspensions of a 200q20v so I can get an alignment done?
>
> Do the stop nuts turn "normal" as in ccw to loosen, etc.?
>
> Does Kroil work for overcoming several years of rusting?
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v



More information about the 200q20v mailing list