A/C Compressor Zener Diode to stop radio popping
Bernie Benz
b.benz at charter.net
Thu May 7 11:21:08 PDT 2009
Zener not needed, any diode of 50V and 1A will do fine. Such a diode
is in the clutch relay and is open if your symptom is transient
voltage spikes which results in radio noise and other more serious
problems. If this diode shorts the compressor will not cycle under
thermostat control, runs all the time, BTDT. Open this relay and
replace the diode. It‘s the one across the relay contacts.
Bernie
On May 7, 2009, at 8:26 AM, Kenneth Keith wrote:
> Hey Listers,
>
> Does anyone know where I can find the appropriate Zener Diode to use
> with the a/c compressor (patient is a 200q20v) to stop the feedback
> popping when the clutch cycles? I found some on Mouser.com but they
> are sold by large quantities and I just need one.
> http://www.sjmautotechnik.com says it needs to be one with an 18v
> breakdown voltage.
>
> Has anyone done the mod? It's described here:
> http://www.sjmautotechnik.com/trouble_shooting/elec.html#click
>
> Cheers,
>
> Kenneth
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v
mailing list