Valve Cover Gasket

[kneale at coslink.net]

Did you NEED the new gasket, Alan?

Original Message:
-----------------
From:  alancordeiro at att.net
Date: Sun, 24 May 2009 22:05:41 -0400
To: yoda_audi at yahoo.com, 200q20v at audifans.com
Subject: Re: Valve Cover Gasket


Correct....the TB has to come off......but I did get a new gasket, and I am 
pretty sure it was from SJM.


----- Original Message ----- 
From: "Austin Calise" <yoda_audi at yahoo.com>
To: <200q20v at audifans.com>
Sent: Sunday, May 24, 2009 5:37 PM
Subject: Re: Valve Cover Gasket


Throttle body must come off to get to the last bolt on the VC.
The TB gasket is paper so you should be able to reuse it BTDT.
A new TB gasket will be dealer only.

HTH's Austin

--- On Sun, 5/24/09, Kneale Brownson <kneale at knitknacks.com> wrote:

From: Kneale Brownson <kneale at knitknacks.com>
Subject: Valve Cover Gasket
To: 200q20v at audifans.com
Date: Sunday, May 24, 2009, 8:21 PM

I'm about to replace a leaking valve cover gasket on the Avant.

Am I correct in assuming I need to remove the throttle body?

There's supposed to be a gasket between the throttle body and the intake.
Is that a dry gasket I'll be able to reuse or do I need to source that 
gasket?
_______________________________________________
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v




_______________________________________________
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v 

_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v


--------------------------------------------------------------------
myhosting.com - Premium Microsoft® Windows® and Linux web and application
hosting - http://link.myhosting.com/myhosting