Sway Bar Bushings on '90 20tq

[Bernie Benz]

"asking for leniency"! Check your subject line! Looks like you should  
be posting on the 90Q-20V list.
Further, nowhere do you specifically identify the year or model of  
your car.

Again, you’re not specific. Is your interest the rubber bushings  
anchoring the bar to the sub frame, or bushings to the lower control  
arm? If the former, these are easily tightened by inserting a hard  
shim between the rubber and the SF to further load the rubber  
bushing. BTDT.

FYI, the 200Q-20V uses a 26mm front anti sway bar. Don’t know about  
the 200 10V models.

Bernie



On Nov 16, 2009, at 5:02 PM, Brian K. Ullrich wrote:

> I know this is the second time I copied both lists, but I'm asking for
> leniency. I'm up against a time constraint, so I'm spreading the  
> questions
> to the larger audience.
>
>
>
> And here it is: is the swaybar the same on the 200 for 1989 - 1991?  
> The
> reason I ask is that I have sourced pretty much every other part  
> but the
> swaybar bushings, and I can only find 1989 or 1991. No 1990 that I  
> can find.
>
>
>
> So I'm hoping that they are interchangeable. So I can buy them.  
> Now.  :-)
>
>
>
> Pleading Mercy.  Brian
>
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v