Master Cylinder - 200Q20VTQ made of unobtanium?

[Ben Swann]

UFO - G60 are common. 

-----Original Message-----
From: Mike Sylvester [mailto:mike at urq20v.com] 
Sent: Thursday, April 08, 2010 1:40 PM
To: Ben Swann
Cc: '200q20V mailing list'; 'George'; 'Bernie Benz'
Subject: RE: Master Cylinder - 200Q20VTQ made of unobtanium?

UFO or G60?
The G60 pads are very common.  
I don't remember if I ever had to change the pads when I had my car with UFO brakes.

G60 http://www.germanautoparts.com/Audi/200/Brake/153/3
UFO http://www.germanautoparts.com/Audi/200/Brake/153/4

Mike

www.urq20v.com

> -------- Original Message --------
> Subject: RE: Master Cylinder - 200Q20VTQ made of unobtanium?
> From: "Ben Swann" <benswann at verizon.net>
> Date: Thu, April 08, 2010 12:52 pm
> To: "'George'" <gsidman at webloq.com>,	"'Bernie Benz'"
> <b.benz at charter.net>
> Cc: '200q20V mailing list' <200q20v at audifans.com>
> 
> 
> MC Ordered!  Shipped for $125.
> 
> Should have made the post about the pads being unobtanium - Rock Auto 
> did not have them and very few suppliers.  ATE does not find in their 
> database according to RA rep.  Go figure!
> 
> Ben
> 
> -----Original Message-----
> From: George [mailto:gsidman at webloq.com]
> Sent: Thursday, April 08, 2010 12:50 PM
> To: 'Bernie Benz'; 'Ben Swann'
> Cc: '200q20V mailing list'
> Subject: RE: Master Cylinder - 200Q20VTQ made of unobtanium?
> 
> Bernie:
> 
> My '91 200 Avant (312,000 miles) is still running the original brake 
> master cylinder, and I hope it continues forever. But, I occasionally 
> watch for a buy on a replacement, just in case. Everyone I check with 
> tells me the MC on this particular model cannot be rebuilt and there 
> is no listed kit for a rebuild. Do you have some special insight or sources on parts,
etc.  ??
> 
> George Sidman
> 
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v