serpentine belt tensioner?

[robert weinberg]

thanks kneale - that's invariably what happened when the v-belt was changed at 
some point.




________________________________
From: "kneale at knitknacks.com" <kneale at knitknacks.com>
To: centaurus3200 at yahoo.com; 200q20v at audifans.com
Sent: Fri, December 10, 2010 3:04:02 PM
Subject: RE: serpentine belt tensioner?

There are two parts to the alternator belt tensioner system (it's a V-belt,
not a serpentine belt, by the way).  The bolt and gear come as a set as
Part No. 034903555B.  The angled bracket with teeth the gear drives to
tension the belt is 034903247D.

It's really important to loosen the two bolts the alternator swings on, as
well as the brace from the A/C compressor belt tensioning system or you
will screw up the teeth on the bracket and wheel.

Original Message:
-----------------
From: robert weinberg centaurus3200 at yahoo.com
Date: Fri, 10 Dec 2010 14:12:52 -0800 (PST)
To: 200q20v at audifans.com
Subject: serpentine belt tensioner?


hi all,

gonna screw with the alternator and regulator. i seem to remember the belt 
tensioner was not working - and using a crow bar to push the alternator far 
enough away to tension the belt ;-)

i would rather not do that again - what's the part number for the
tensioner? i 
can't find it online.

thanks,
Robby



      
_______________________________________________
200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v


--------------------------------------------------------------------
mail2web.com – Enhanced email for the mobile individual based on Microsoft®
Exchange - http://link.mail2web.com/Personal/EnhancedEmail