resend distributor removal/intake manifold 2nd try

[Dave Defferding]

??Not having a dremel tool at the time, I used one of those mini-hacksaw
blade holders and sawed a slot in the head of the locknut and unscrewed
it--after a couple of doses of SiliKroil penetrating solvent.  I also made a 
tool to more easily access the distributor hold-down nut/bolt.   No longer 
needing the locking
screw I ground  off the lug for it on the distributor hold-down bracket.
See attached photos:

----- Original Message ----- 
From: "Kneale Brownson" <kneale at knitknacks.com>
To: <jlagnese at massed.net>
Cc: "200q20V mailing list" <200q20v at audifans.com>
Sent: Tuesday, October 19, 2010 12:55 PM
Subject: Re: resend distributor removal/intake manifold 2nd try


> Distributor in place or on the bench?
>
> Do I need the intake manifold gasket if I take the manifold off?
>
> How else do you access the distributor clamp bolt?
>
> jlagnese at massed.net wrote:
>> I used large channel lock pliers.
>> ---- Original message ----
>>
>>     *Date:* Tue, 19 Oct 2010 15:18:33 -0400 (EDT)
>>     *From:* <jlagnese at massed.net>
>>     *Subject:* Re: resend distributor removal/intake manifold
>>     *To:* "Kneale Brownson" <kneale at knitknacks.com>, "200q20V mailing
>>     list" <200q20v at audifans.com>
>>     >
>>     >_______________________________________________
>>     >200q20v mailing list
>> http://www.audifans.com/mailman/listinfo/200q20v
>>
>>
>> -- 
>> This message has been scanned for viruses and
>> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
>> believed to be clean.
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>