Fusebox internals - map/diagram

[Huw Powell]

Obviously, one route would be to do what I did, and use the Bentley as a 
source and rearrange everything.

Since I suspect they are very similar, you could work with a printout of 
mine (it fits on 8.5 x 14 paper), and check it off against your diagrams 
to see if there are any differences.

My diagram is probably the 85-87 type 85 fusebox, I don't know how much 
they changed, I suspect not much.

On 9/24/2010 9:02 AM, Ben Swann wrote:
>
> I am re-wiring my '90 CQ for installation of S2 ABY engine.  Presently everything is
> hooked up to proper terminals as best as I can tell, but don't seem to be getting power
> to the ECU.  Tracing reveals that for some reason major portions of the fusebox are not
> getting power.  The ignition switch and all electrical systems were working when I
> pulled the 7A engine about 2 years ago.  I['m not ruling out a bad wire or switch.
>
> What would be helpful is a diagram or map of fusebox internals that show connections
> between relays and terminals.  The one on Huws site is helpful, but I'm wondering if
> there are any other versions that can be printed out or have view of connections
> pertaining to '90 coupe quattro,  200 turbo quattro or even the S2 ABY in english of
> course.
>
> Ben
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/