alignment

[Bernie Benz]

Peter,

See my DIY Alignment Tech Article posted on both AW and QW forums.  
I’m active on the QW C5 forum, as its DIY, DFWAB!  contrarian. Tough  
duty but someone has to do it. Join us!

Camber: I believe that the ’02 S6 front suspension has the aluminum  
vertical member with bolt on wheel bearing, as does my ’02 A6 2.7 MT  
w/ Sport package. If so, camber is adjustable by shimming the wheel  
bearing, BTDT. Before doing so, equalize the camber between the two  
sides by moving the sub frame.

Bernie

On Dec 8, 2011, at 8:37 AM, PeterBergin at aol.com wrote:

> Hi guys, anyone have any front end alignment information or advice  
> for a
> 2002 S6 (C5).  Yeah I need to sign up for one of the other lists.
>
> I replace my right side tie rod end and went to a local shop for
> alignment.  They adjusted the toe, however I was told the right  
> side camber  was off,
> and on my car it was not adjustable.  Left camber was fine.
>
> I can't believe that there is not a camber adjustment.
>
> Thanks, Pete
> 91 200 (gone to new owner)
> 02 S6
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v