Re: alignment

[quikqtr@yahoo.com]

Pete, most of the front Camber adjustment on that Audi is made by shifting the Aluminum brackets (sway bar pivots from these brackets) along with the subframe sometimes requiring plenty of "BFI" 
(Brute force & ignorance).
If only the subframe was shifted the results would be minimal.

Good luck, Randy

Sent from my HTC EVO 4G I got from www.randymueller.acnrep.com

----- Reply message -----
From: PeterBergin at aol.com
Date: Thu, Dec 8, 2011 9:37 am
Subject: alignment
To: <200q20v at audifans.com>

Hi guys, anyone have any front end alignment information or advice for a  
2002 S6 (C5).  Yeah I need to sign up for one of the other lists.
 
I replace my right side tie rod end and went to a local shop for  
alignment.  They adjusted the toe, however I was told the right side camber  was off, 
and on my car it was not adjustable.  Left camber was fine.
 
I can't believe that there is not a camber adjustment.  
 
Thanks, Pete
91 200 (gone to new owner)
02 S6
_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v