Distributor part numbers for 1991 Audi TurboQuattro 20v

[Bernie Benz]

I don’t have my old 89 chassis Bentley so don’t know if the 2013 is  
for the 7A engine or not.

Read the QW C4 forum, here
http://forums.quattroworld.com/v8/msgs/5656.phtml

Bernie


On Jan 10, 2011, at 11:59 AM, Jim Hollander at Hot Grips Mfg., Inc.  
wrote:

> Thanks for the super fast reply Bernie.  Does that mean that even  
> the p/n 0237522013 would be OK for my '91 200 TQ 20v (3b engine)?   
> The dealer did confirm that the distributors are no longer  
> available with no stock throughout the USA.
>
> Does anyone know about the availability of that Bosch Hall Sensor  
> Kit p/n 1230329049 ?  My Audi dealer drew a blank on it, not being  
> able to advise me on it.
>
> Jim
>
>
> ----- Original Message -----
> From: "Bernie Benz" <b.benz at charter.net>
> To: "Jim Hollander at Hot Grips Mfg., Inc." <Jim at hotgrips.com>
> Cc: "200q20V mailing list" <200q20v at audifans.com>
> Sent: Monday, January 10, 2011 2:45 PM
> Subject: Re: Distributor part numbers for 1991 Audi TurboQuattro 20v
>
> Jim,
> Your quoted numbers are all correct for the 3B. The distributor for
> the 7A engine will also work if you trim its rotor ears to 0.430/435”
> wide. BTDT.
>
> Bernie
>
>
> On Jan 10, 2011, at 11:19 AM, Jim Hollander at Hot Grips Mfg., Inc.
> wrote:
>
> > Did I accidently ruin my ECM ..Ben,
> >
> > Further to my being unable to start my 1991 Audi TQ 20v. I have a
> > situation where I need advice on distributors.
> >
> > As you might recall, I went thru many different attempts to revive
> > the car unsuccessfully.  I flatbed it to a shop who has been
> > working on it for 4+ weeks (Northern Motorsports - Wilder, VT) .
> > They reached a point where after working on various issues they
> > said I need a Hall Sensor kit p/n 1230329049 or a whole distributor
> > Bosch p/n 0237522019 or OEM Audi p/n 034905205Q.  They stated they
> > knew someone in Chicago that had a used correct distributor for
> > $500. at which point I told them I would locate a distributor.
> >
> > I contacted Force 5 (who specializes in used Audi parts) in
> > Concord, NH who shipped me what they felt was the correct
> > distributor for a 1991 Audi TurboQuattro 20v (3b engine) but the
> > part number last digits are 2013 and not the 2019 that is needed.
> >
> > The repair shop takes the position that the distributor ending
> > with  p/n ...2013 will enable the car to run, but that they do not
> > know if the performance will suffer as a result of it being the
> > wrong distributor.
> >
> > Can you comment on the part numbers?
> >
> > Jim Hollander
> > Hot Grips Mfg., Inc.
> > Plainfield, NH
> > _______________________________________________
> > 200q20v mailing list http://www.audifans.com/mailman/listinfo/ 
> 200q20v
>