ID of power steering hose?

[alan cordeiro]

Tom,

If this is indeed the high pressure side of the pump you are considering 
repairing, either get a new hose or have a shop that works on high pressure 
hydraulic hose rebuild it.

The pump generates a maximum of about 2200 psi at that hose when the 
steering is turned vigorously.

(If it is not the high pressure side, it' OK to patch)

Good luck,

Alan
----- Original Message ----- 
From: "Tom Egbert" <tomegbert1323 at yahoo.com>
To: <200q20v at audifans.com>
Sent: Monday, July 11, 2011 10:05 PM
Subject: ID of power steering hose?


>  I had a pump to rack hose rub on radiator and I am considering cutting 
> the
> hose through at the leak and putting a nipple in there clamped. Anyone 
> know the
> ID of the rubber part of the hoses?
>            Thanks, Tom
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>