Samco Hoses

Mike Sylvester mike at urq20v.com
Thu Jun 2 04:41:59 PDT 2011


Brandon,

I know what you are saying about the clamps.
The hose has to be really clean.  
If there is any oil at all the silicon gets very slippery.

Mike

www.urq20v.com

> -------- Original Message --------
> Subject: RE: Samco Hoses
> From: "Brandon Rogers" <brogers at terrix.com>
> Date: Wed, June 01, 2011 3:44 pm
> To: "'Mike Sylvester'" <mike at urq20v.com>,        "'200q20v list'"
> <200q20v at audifans.com>
> 
> 
> Can't recall where I got mine - but just fyi they don't have the ridges on
> the ends where the clamps go - which is a big PITA on mine - the clamp(s)
> needs to be at the edge and want to slip off as you tighten them down...
> 
> I went back to new OE - and keep the samco as my emergency backup in the
> trunk.
> 
> YMMV
> 
> Brandon 
> 
>  
>  
> 
> 
> -----Original Message-----
> From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] On
> Behalf Of Mike Sylvester
> Sent: Wednesday, June 01, 2011 12:52 PM
> To: 200q20v list
> Subject: Samco Hoses
> 
> 
> Anyone know where to buy Samco intake hoses for the 3B?
> The dealer wants around $175 for the factory Michelin Man hose and used
> hoses aren't holding up to 26psi. 
> 
> Mike Sylvester
> 
> 
> 
> 
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v



More information about the 200q20v mailing list