A/C Belt

[Tony Hoffman]

Put it on the AC compressor first, then over the crank. If it won't go all
the way over the crank easily, you can use a screwdriver or just a strong
hand to get it started. Do it in a clockwise direction, then turn the crank
with a breaker bar/27mm socket. Tighten and you are good to go.

Tony

On Thu, Oct 20, 2011 at 8:54 PM, David Sexton <sextondm at gmail.com> wrote:

> Help!
> How does one get the new a/c belt on the compressor and crank pulley???  It
> seems like it's way too short, but it's identical in length to the old one
> that I just took off.  I've seen my brother do this easily, he says that
> there's kind of a trick to it.
> Any ideas?
> Thanks,
>
> Dave Sexton