diagnosis help

[feelstranger]

Thanks Austin,
I did notice that when I pulled the cap that there was a bit of oil in 
there, maybe contributing to general gunk.
I'll blast it out and see what happens.

I believe I've read (Bernie?) that oil there indicates problems with crank 
breather.  True?

Nat

-----Original Message----- 
From: Austin Calise
Sent: Tuesday, February 07, 2012 10:31 PM
To: 200q20v at audifans.com
Subject: Re: diagnosis help

Nat, your hall sender may just be gunked up a bit, get some contact cleaner 
to clean out the inside of the dizzy.

My 20v was giving me an occasional  CEL flash with the hall sender code but 
didn't stop the car starting running or driving.
I ended up replacing the dizzy anyway for one with a steel gear. But I did 
however notice after removing the old one that the hall sender was gunked 
up.
I've also experienced this in the past with other 20v's and cleaning sender 
did the trick. TPS code probably just means you need to adjust TPS a hair.

Austin
_______________________________________________
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v