Removing rear window regulator assy. Help!

[Tony Hoffman]

Pull the inner door assembly from the outer skin, then you will see the
retaining clip holding the glass in place. This is done iwht the four 8mm
(13mm head) bolts, two facin the interior of the car at the bottom, two at
the top facing forward and backward. There are shims in place as well, you
may want to mark them for position if your memory is like mine :(

Tony

On Thu, Aug 22, 2013 at 5:34 PM, Bernie Benz <b.benz at charter.net> wrote:

> Apparently the “tab“ attaching the cable to the “lifter pivot“ (the part
> that slides up and down the guide rail) moving the glass via a pivot pin
> thru the plastic glass attached bottom piece, is broken.
>
> Further, apparently this lifter pivot pin has an E-ring keeping it in the
> glass plastic piece. If so,(?) visible only with a small inspection mirror,
> how does one remove the ring to free the regulator assy from the glass? No
> mention in Bentley! Please tell me that there is no retaining ring on the
> pin!
>
> Thanks guys!
> Bernie