Fuel pump sleeve and tool 3214

[Kneale Brownson]

The baskets differ, Bob.  The S-tank basket has some internal plastic 
wings  that prevent it from accepting the sleeve holding the pump.  
Here's a side-by-side view of the two baskets: 
http://www.pbase.com/kneale_brownson/image/30210145/large   Must be a 
different sleeve for S-cars.  I was replacing my leaking 200's tank with 
an S-car tank.   I put the 200 basket into the S tank so I could use the 
sleeve I had.

I removed the sleeve using the 3214 tool.  I've read about removing the 
sleeve using crossed flat-bladed screwdrivers twisted against eachother 
while their blades are in the slots where the 3214 sits.



On 6/1/2013 9:25 AM, Robert Bade wrote:
>
> I am replacing my fuel pump. I have the newer Bosch pump but not the adapter sleeve, part # 441201791. I've searched for it and come up empty. Does anyone know of a source for it or a way around not having it?  Would a basket assembly from an AAN system fit in our tanks? Also tool 3214 seems to be required for removal. A source or way around? I did find a homemade tool here
>   http://12v.org/urs/FuelPumpTestingandReplacementProcedures_Rev2.pdf
>
> Any help would be greatly appreciated!
>
> Bob
>
>
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v
>
>