Dash removal for recirc flap work

[Kenneth]

Randy Mueller <quikqtr at yahoo.com>
> 
> Recirc Flap Mounting Repair Information:?
> Refer to TSB 879001
> when the Twist Lock mounting point (Plastic) breaks, there is a metal repair bracket (if still available?) PN 200 271 200 Plus a pair of self drilling/self tapping screws PN 013 966.12 (or 1/4 Hex Head screws available locally.
> 
> As for the Upper Return Spring Plastic Support that also breaks:
> I snip off the broken plastic support rod, pre-bend a piece of coat hanger into an "L" shape, Clamp it into a small Vise Grip Type Pliers, Heat the long end with a Butane or Propane Torch & Pierce it through one side of the plastic to come through where the original rod was, Heat Coat Hanger again & continue on through apposing side, Let cool & bend protruding end to lock it into place = Fixed...

Thanks, Randy.

I have the repair kit consisting of the metal bracket, spring, and maybe screws.  Anyone know where can I find a copy of the TSB to see what it reads?

Cheers,

Kenneth