No Start?

[Kneale Brownson]

My 200q20v has not started since I drove it into the garage after 
running over a pile of ice chips the plows had left in an intersection.

I've replaced the timing sensors because one tested way below spec and 
the other was marginal.  I thought maybe the timing pin on the front of 
the flywheel had been damaged, but today I removed the starter and 
turned the engine until I could see the pin looking bright and shiny.

The fuel pump runs with a fuse in the relay.  I replaced the fuel filter 
when I replaced the sensors.

Where's my "fire"?