Page 19.11 bentley 3b cooling system draining

[Kneale Brownson]

That website is a good one to bookmark 

Tediously fingered on my iPhone


> On Dec 28, 2017, at 12:24 PM, Steven Murray <michellepfeiffersx at yahoo.com> wrote:
> 
> Thanks all.    I drained 1.5 gallons yesterday by undoing 3 hoses and refilled with 50/50 pentosin today so I should be ready for the low temps expected.  I found a good procedure on changing the timing belt at a quattro123 web site.  It was probably created by the 200 20v hall of fame members from 10 years ago or more. 
> 
> 
>    On Thursday, December 28, 2017 1:25 PM, Frank de Kat <fdekat at sentex.net> wrote:
> 
> 
> Hello Stephen:
> 
> You *can* get to the aux rad hoses from underneath (may have to remove  
> some shields?), and yes, is a bit painful.
> 
> The good thing is (once you figure it out, and have done it once) that  
> the front bumper is relatively easy to take off. Makes front work a  
> lot easier.    Time belt is almost 'easy' with the front of the car  
> out the way!  :-)
> 
> =Frank=
> 
> 
> 
> 
> Quoting Steven Murray <michellepfeiffersx at yahoo.com>:
> 
>> The hose ends to the aux rad seemed very hidden (recollection from a  
>> peek last month) .   Folks normally remove the bumper ?  Grill ?  
> _______________________________________________
> 200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v
> 
> 
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v