[A4] estimates for control / ball joints
Joel Landsverk
jlandsverk at jjkeller.com
Tue Apr 27 14:10:57 EDT 2004
Richard,
I talked with ECS about this. He said that the full kit, all hardware
included, is $599, same as you said.
I don't think I'm going to tackle this myself. I've gotten in over my
head too many times. He also said it's a full day for his shop to
complete it. So at $65/hr, that's about another $500. Ouch. But, he
says that should last a while, as these parts are getting better and
better all the time.
Joel L.
>>> "Richard Hurt" <rhurt at thepoint.net> 4/27/2004 12:19:36 PM >>>
Joel,
I need to do this same operation on my '98Q and I found a pretty good
deal at ECS (thanx to this list :). They have a couple of packages
(w/wo tie rod ends) for $529.95 & $599.95 that look pretty complete. I
need to call them and ask if there is anything else that is required
(seals, nuts & bolts, washers, tools, etc.) to do this job start to
finish. I don't want to have my front end apart and then realize that
I
need some extra dealer only part. :/
Anyway, if anyone has any feedback on these kits, or tips on doing this
in your own garage, I would truly appreciate it.
Later...
Richard
BTW: Here's the links for those kits:
Meyle Upgraded OE Control Arm Kit W/Hardware
http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi/?html=learnmore.html&productID=3005
Meyle Upgraded OE Control Arm & Heavy Duty Tie Rod End Kit W/Hardware
http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi/?html=learnmore.html&productID=3006
More information about the A4
mailing list