[A4] ball joint boots

[Richard Hurt]

No help on the clips.  I usually just end up cutting the old ones off and
using regular screw type clamps to secure the new boots.  I think the
factory ones are really designed to be single use.

Later...
  Richard

On 3/1/06, Brandon Rogers <brogers at terrix.com> wrote:
>
> PS - any tips on getting the circular clips back in place - the ones that
> keep the boots sealed - looks like I'll need some type of Forcep or
> something.....
>
> Thanks again guys
>
> Brandon
>
>   ----- Original Message -----
>   From: Brandon Rogers
>   To: Pbadore at aol.com ; a4 at audifans.com
>   Cc: quattro at audifans.com
>   Sent: Wednesday, March 01, 2006 3:03 PM
>   Subject: Re: [A4] ball joint boots
>
>
>   well I've checked with a local import parts warehouse, SJM and a local
> dealer, plus Energy Suspension as suggested by Robert M. and no joy.  oh
> well....maybe I'll try a bicycle tube repair patch...????  total hack but
> may last a while here in CO where we don't get much precip....
>
>   thanks-
>     ----- Original Message -----
>     From: Pbadore at aol.com
>     To: brogers at terrix.com ; a4 at audifans.com
>     Cc: quattro at audifans.com
>     Sent: Wednesday, March 01, 2006 1:56 PM
>     Subject: Re: [A4] ball joint boots
>
>
>     I do not see a separate balljoint boot in my ETKA illustrations but my
> copy is a little dated and there is one part number which is not illustrated
> but is in the parts number list which could be the boot. You could order it
> to find out for sure.
> _______________________________________________
> A4 mailing list
> A4 at audifans.com
> http://www.audifans.com/mailman/listinfo/a4
>