[ba] Ouch

Buchholz, Steven Steven.Buchholz at kla-tencor.com
Mon Jun 11 15:10:09 EDT 2001


... methinks that is where the confusion came from ... I'll bet the new S4
doesn't have a fancy oil pan like the old one did.  I can confirm the report
on the prices asked for the I-5 based S4 ... I've got one in the garage now
waiting to be attached to whatever motor goes into the ury ... 

Steve Buchholz
San Jose, CA (USA)
> 
> hmmm...  probably not dimensinally the same as my I-5. 
> chances are good the 
> oil pan would not fit.
> 
> perhaps the old s4 uses an aluminum pan that might work as an 
> upgrade  on 
> the mc motor?
> 
> btw, kevyn.. SWEET ride :)
> 
> jim
> 
> 
> >From: Kevyn Shortell <kevyn at mac.com>
> >To: jim rose <sf5ktq at hotmail.com>
> >Subject: Re: [ba] Ouch
> >Date: Sun, 10 Jun 2001 17:37:07 -0600
> >
> >I have a 2001 S4 Avant
> >
> >Kevyn
> >
> >on 6/8/01 11:40 AM, jim rose at sf5ktq at hotmail.com wrote:
> >
> > > Rad. thanx. wasnt sure if Kevyn drove a biturbo or a UR.
> > >
> > > -jr
> > >
> > >
> > >> From: JShadzi at aol.com
> > >> To: <sf5ktq at hotmail.com>, <kevyn at mac.com>, 
> <ba-group at audifans.com>
> > >> Subject: Re: [ba] Ouch
> > >> Date: Fri, 08 Jun 2001 13:35:41 EDT
> > >>
> > >> Yes, I will let you know, but it will fit a 10v, the 20v is 
> >dimensionally
> > >> the same.
> > >> Javad
> > >>
> > >> In a message dated Fri, 8 Jun 2001 11:11:18 AM Eastern 
> Daylight Time, 
> >"jim
> > >> rose" <sf5ktq at hotmail.com> writes:
> > >>
> > >> << javad,
> > >>
> > >> could you let us know what you find out on the pan?
> > >>
> > >> anyone know if itll fit a 10v (if it's an older s4) ?  
> my pans a MESS 
> >from
> > >> various rocks, whacks, oil leaks + fluid explosions over 
> the years. my 
> >oil
> > >> changes would be so kmuch more fun if the scenery were better...
> > >>
> > >> kevyn, that's a drag (no pun...)!  you gotta be careful 
> with those 
> >dukes of
> > >> hazard style bridge crossings, esp with BA roads! ; )
> > >>
> > >>
> > >>
> > >> -jim
> > >>
> > >>
> > >>
> > >>
> > >>> From: JShadzi at aol.com
> > >>> To: kevyn at mac.com, ba-group at audifans.com
> > >>> Subject: Re: [ba] Ouch
> > >>> Date: Thu, 7 Jun 2001 22:46:54 EDT
> > >>>
> > >>> Well, yes, for an all aluminum oil pan with nice 
> baffling inside, that 
> >is
> > >>> not
> > >>> bad.  I have seen them sold used for over $200, I am 
> going to have to
> > >> check
> > >>> with the dealer, the price must have gone down.  The 
> labor on the 
> >other
> > >>> hand....
> > >>> Javad
> > >>> www.80tq.com
> > >>>
> > >>> In a message dated 6/7/2001 7:44:51 PM Pacific Daylight Time,
> > >> kevyn at mac.com
> > >>> writes:
> > >>>
> > >>> << From the Audi dealer in Tucson AZ, I take it
> > >>> that's cheap or something?
> > >>>
> > >>> Kevyn



More information about the Ba-group mailing list