[ba] Lunch, with a side of chips

[Dan Hamren]

I think the -20 should be fine.  It’s a little faster and generally
speaking (from my 6+ years of selling integrated circuits) most times my
customers can use an upgraded speed.  Just make sure it is a ceramic
chip and not a plastic chip.  When I did the Qlcc mod on my 87 avant I
took an old 84 date code D 2764 A-4 out of our own stock.  Worked fine

I would go ahead and try the one you have out.  If you get desperate I
can get you one out of our stock, but I really don't see any problems
with using the faster speed.



Dan Hamren Sales Representative
Magnitude Electronics LLC
T 650-259-1890 F 650-259-1891
www.magnitude-electronics.com
AOL IM  HamrenDan
MSM IM  Dan at magnitude-electronics.com


-----Original Message-----
From: ba-group-admin at audifans.com [mailto:ba-group-admin at audifans.com]
On Behalf Of Brian Devlin
Sent: Thursday, October 24, 2002 4:38 PM
To: ba-group at audifans.com
Subject: [ba] Lunch, with a side of chips

Hi,
Brian here, you may remember me from a lunch or two.
I've just put in a 1.8 bar spring and acquired an
EPROM for QLCC mods. It's a 2764A-20 (200ns), I hope
that'll work because I had "D2764-4" written down, and
Jameco doesn't have "-4"s. I also have access to an
eprom programmer, but  they only way I can get the
code into it, at the moment, is by copying from
another chip. Is there anybody who can bring a chip
with QLCC on it to lunch, or elsewhere?
-Brian
-86 5ktq

__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
_______________________________________________
Audifans ba-group mailing list
Send posts to: mailto:ba-group at audifans.com
Unsubscribe or Manage your list options:
http://www.audifans.com/mailman/listinfo/ba-group