[Biturbos4] Brake upgrade / EBC Greenstuff
Keman
keman at interwolf.net
Wed Dec 1 16:25:03 EST 2004
Rust on the rotors. Check em out after it's been parked for a couple of
days .. you get temporary rough spots that don't necessarily go away with
just a few stops. All sorts of strange things can happen.
My S4 did this all the time, luckily it goes away over time and gives you
a better excuse for you to be the one that drives when you have friends
over and wanna go somewhere:
"Lets take my car, I need to get the rust off my rotors before it gets too
bad."
On the note of warped rotors- one time I didn't have the time to torque my
wheels to spec when I rotated tires (can't remember why) so I just blasted
them on with an impact. Stupid. Within a day I had a bad warp up front at
highway speed braking. I basically pulled the rotor out of round from
uneven torquing. Surprisingly.. I retorqued all the lugs and it went away
after a few days.
- Keman
On Wed, 1 Dec 2004, John Koenig wrote:
> I replaced my OE pads with EBC Greenstuff, probably for the same reasons
> you're considering them. I am in the process of trying to troubleshoot a
> problem I have with vibration, which I first thought was warped rotors. The
> car is street/highway driven, and I'm getting to be an old man, so that
> usually means anticipating traffic, emphasizing smoothness and not using the
> brakes too hard, as a general rule. What I notice though, which tends to
> refute the warped rotor theory, is that the vibration seems based on
> conditions. It is usually most noticeable after the car has been sitting a
> day or two, which to me suggests some kind of pad/rotor interaction or
> corrosion issues. A few blasts of hard braking tend to diminish the problem
> a lot, and I've never heard of that with warped rotors. I guess maybe my
> street driving isn't using them hard enough.
>
> Please note: This is by no means definitive; I may have other issues, and
> I'm very reluctant to dismiss the product as inferior when I have too many
> variables. Just responding like you asked ...
>
> John
More information about the Biturbos4
mailing list