[Biturbos4] clamps for small hoses

[David Kavanagh]

ok,. thanks! I removed 2 of the factory ones and used zip-ties. I'll
check them after some miles have been put on the car. If they don't
hold, mcmaster has some interesting looking options!

David


On Mon, 08 Nov 2004 12:48:39 -0500, Igor Kessel <kbatpo at comcast.net> wrote:
> David Kavanagh wrote:
> 
> 
> > I need to test my bypass valves and see that the hoses are held on
> > with those one-time-use clamps. A local lister (Phil) pointed me to
> > the local Lowes store for the spring type clamps, but I could not find
> > them, nor could any store personel. The screw-type clams just aren't
> > good for hoses this small, any other ideas? (or sources to check?)
> >
> > David
> >
> 
> www.mcmaster.com
> 
> --
> Igor Kessel
> two turbo quattros
> 


-- 
'00 A6 biturbo 6-speed
'01 allroad 6-speed