[Biturbos4] Vag-Com not detecting ABS Module?

[The Corbs]

Thanks Ned.  I've done some more homework in Audiworld and it appears to be 
a relatively common problem, especially with the 2000 models.

Modulemasters.com comes highly recommended for the rebuild and it is ~50% of 
a new one, so current plan is to give it a try.

John Corbs

----- Original Message ----- 
From: "Ned Ritchie" <Q at IntendedAcceleration.com>
To: "'The Corbs'" <c.corbishley at comcast.net>; <biturbos4 at www.audifans.com>
Sent: Tuesday, July 04, 2006 6:29 PM
Subject: RE: [Biturbos4] Vag-Com not detecting ABS Module?


> That is the way it worked on earlier cars
> Ned
>
> -----Original Message-----
> From: biturbos4-bounces at www.audifans.com
> [mailto:biturbos4-bounces at www.audifans.com] On Behalf Of The Corbs
> Sent: Saturday, July 01, 2006 10:25 AM
> To: biturbos4 at www.audifans.com
> Subject: [Biturbos4] Vag-Com not detecting ABS Module?
>
> Just hooked up the V-C to our '00 S4 for the first time this morning.
>
> It detected all other modules, but no ABS?
>
> Does this mean the ABS module is fried?
>
> The ABS and Brake fault lights are on, but the brakes themselves are
> functioning fine.
>
> Any suggestions for next steps?
>
> Thanks
>
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>