[Biturbos4] B5 V6 "unilateral" misfiring

[Chris Newbold]

On Mon, Apr 14, 2008 at 12:59 PM, Robert Myers <bob at chips-ur-s.com> wrote:

>  It sounds like you have fairly well eliminated the POS and coils as the
> source of the problem.  This leaves a low voltage to the primary as a
> possibility.  This could happen as a result of corrosion at the connector
> for the coil (this is, on the AAN engine, at a white connector on the
> firewall) or some other high resistance spot in that circuit.  This could be
> worth checking.

Thanks for this.

I think my two next steps are to check for grounding issues in any
shared wiring for bank 2 and to do the same for any shared +12V
wiring....

-Chris
2001.5 S4 Avant 6spd