[Biturbos4] S4 Dowpipes Install

[Mark R]

I always used (and stock) Bailey valves.  Never had an issue.

Mark Rosenkrantz

On Thu, Mar 26, 2009 at 10:22 PM, Rhett Ennis <rennis at bpcpa.com> wrote:

>
> Agreed, I'd skip the R1 DVs.
>
> -----Original Message-----
> From: biturbos4-bounces at www.audifans.com
> [mailto:biturbos4-bounces at www.audifans.com] On Behalf Of
> quickaudi at gmail.com
> Sent: Thursday, March 26, 2009 6:21 PM
> To: biturbos4 at www.audifans.com
> Cc: grega at pobox.com
> Subject: Re: [Biturbos4] S4 Dowpipes Install
>
>  Not to burst your bubble, but I have read about several issues with the
> R1 diverter valves, up to and including turbos being destroyed due to
> the some parts failing.
>
> Just buyer beware.
>
> As for the downpipes, make sure to remove the axle half shields and get
> those sensors loose and the heat shields should be loose as well. Have
> fun with those heat shield clamps. May want to shoot some pb blaster on
> any of the bolts that might be suspect.
>
> Joel
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>