[Biturbos4] EGT sensor

[Adam Jansen]

I have to replace mine as well, along with an 02 sensor...

I am assuming that Bank1 is the driver's side, is that correct? Sensor Two
would be the one further downstream?

Thanks for the help!
Adam

-----Original Message-----
From: biturbos4-bounces at www.audifans.com
[mailto:biturbos4-bounces at www.audifans.com] On Behalf Of Wilson Northrup
Sent: Sunday, September 05, 2010 9:17 AM
To: j.koenig
Cc: biturbos4 at audifans.com
Subject: Re: [Biturbos4] EGT sensor


http://www.audiworld.com/tech/eng.html

I cut off the back of the EGT to get a socket on there. I wasn't able to get
it off with a regular wrench.


On Sun, 5 Sep 2010, j.koenig wrote:

> Does anyone have any tips on replacing the driver's side EGT sensor (2000,
6-spd.)?
> In particular, how to loosen the fitting on the exhaust end?
> Very little room for tools.  Wrestled with it yesterday, but failed.
>
> Thanks in advance,
> John
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>
_______________________________________________
Biturbos4 mailing list
Biturbos4 at www.audifans.com
http://www.audifans.com/mailman/listinfo/biturbos4