[Biturbos4] EGT sensor

[Wilson Northrup]

i think this was answered already - if you require a visual aid, the link 
on audiworld includes some of my photos which illustrate this.



On Sun, 5 Sep 2010, Adam Jansen wrote:

> I have to replace mine as well, along with an 02 sensor...
>
> I am assuming that Bank1 is the driver's side, is that correct? Sensor Two
> would be the one further downstream?
>
> Thanks for the help!
> Adam
>
> -----Original Message-----
> From: biturbos4-bounces at www.audifans.com
> [mailto:biturbos4-bounces at www.audifans.com] On Behalf Of Wilson Northrup
> Sent: Sunday, September 05, 2010 9:17 AM
> To: j.koenig
> Cc: biturbos4 at audifans.com
> Subject: Re: [Biturbos4] EGT sensor
>
>
> http://www.audiworld.com/tech/eng.html
>
> I cut off the back of the EGT to get a socket on there. I wasn't able to get
> it off with a regular wrench.
>
>
> On Sun, 5 Sep 2010, j.koenig wrote:
>
>> Does anyone have any tips on replacing the driver's side EGT sensor (2000,
> 6-spd.)?
>> In particular, how to loosen the fitting on the exhaust end?
>> Very little room for tools.  Wrestled with it yesterday, but failed.
>>
>> Thanks in advance,
>> John
>> _______________________________________________
>> Biturbos4 mailing list
>> Biturbos4 at www.audifans.com
>> http://www.audifans.com/mailman/listinfo/biturbos4
>>
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4
>