[e//S2] Audi intake by wagner tuning on ebay.

Andrew.Jackson at bmo.com Andrew.Jackson at bmo.com
Wed Aug 6 12:12:32 EDT 2003


Can't speak for the WT IM, but my Dahlback did not require any such mods
on my Cq.


ALJ




Peter Schulz <peschulz at cisco.com>
Sent by: es2-admin at audifans.com
08/06/2003 10:28 AM


        To:     <saltinot at alltel.net>
        cc:     es2 at audifans.com
        Subject:        Re: Re: [e//S2] Audi intake by wagner tuning on ebay.


Tom:

I guess that the question should then be...

does the use of this IM require any modifications to the location of the
stock radiator or condensor location on the B3 chassis?

-Peter



At 10:25 AM 8/6/2003 -0400, you wrote:
>Actually that isn't a B3 chassis car at all.  It's a B2.
>
>Tom
>
>From: Peter Schulz <peschulz at cisco.com>
>Date: 2003/08/06 Wed AM 09:35:19 EDT
>To: SigDesign at aol.com
>CC: es2 at audifans.com
>Subject: Re: [e//S2] Audi intake by wagner tuning on ebay.
>
>Aaron:
>
>question for you when installing this type of IM...
>It appears in the pictures that I have seen that the radiator is set back
further in the chassis that in a typical B3/b3 standard radiator.
>So much so that they may not be room for the ABS pump...
>
>Can you verify whether this is true or just an optical illusion?
>
>
>thanks
>
>-Peter
>
>At 06:29 PM 8/5/2003 -0400, you wrote:
>>--
>>[ Picked text/plain from multipart/alternative ]
>>Finally picked up my intake (it was sitting at the post office since
last
>>week). Beautiful! It needs to be Extrude Honed, but other than that,
very nice
>>(no audi rings). You can tell the original had a logo on top at one
point (audi
>>rings, MTM, who knows) but it must have been removed from the mold. The
seller
>>(Carsten) is Carsten Wagner a.k.a. Carsten and Werner Wagner of Wagner
>>Tuning.
>>
>>I see the last one was at $560.00 when bidding was over and is now
relisted:
>>
>><A HREF="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2426002876&category=38634&rd=1">http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2426002876&
>>category=38634&rd=1</A>
>>
>>I think it's worth the money.
>>
>>Mark E. Siggelkow
>>'90 RSCoupe (project)
>>_______________________________________________
>
>Peter Schulz
>1990 CQ (awaiting S2 3b engine transplant)
>1991 200 20v TQW indigo mica
>1991 200 20v TQW titanium grey
>Chelmsford, MA USA
>peschulz at cisco.com
>
>_______________________________________________
>eS2 mailing list
>eS2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2

Peter Schulz
1990 CQ (awaiting S2 3b engine transplant)
1991 200 20v TQW indigo mica
1991 200 20v TQW titanium grey
Chelmsford, MA USA
peschulz at cisco.com

_______________________________________________
eS2 mailing list
eS2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2





More information about the Es2 mailing list