[Es2] Good news and bad news...

[C1J1Miller at aol.com]

Hi Ben.
Is this a new distributor?  I'd start with the alignment first.  
Assuming you've moved it around, put the engine to TDC, pull the dist. cap, 
and look to see if the rotor points at the scribe mark on the side of the dist. 
body (center of rotor to line).  Think it should be the number 1 plug wire 
too.


____________________________________________________
Chris Miller, Bolton MA USA, c1j1miller at aol.com
'91 200q20v ==> http://members.aol.com/c1j1miller/index.html
____________________________________________________