[e//S2] In reply to andrews jackson..

[Andrew.Jackson at bmo.com]

This is a multipart message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
Almost everything you "need" will connect to harness T10a (black), and it
is all really quite simple if you have both wiring diagrams available.
(at least AAN -> 7a wasn't too bad)

The most complex circuit in the whole process (maybe even the whole car)
by FAR has to be the cooling system.
I still haven't figured that part out 100% yet and I'm currently
struggling with a near overheat condition because of it.  :-/

At this point, I'm at the verge of admitting defeat and going to a rad
specialist to fix me up.


ALJ




"josh Leonti" <livinotte at cox.net>
Sent by: es2-admin at audifans.com
06/02/2003 05:25 PM


        To:     <es2 at audifans.com>
        cc:
        Subject:        [e//S2] In reply to andrews jackson..


This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
I got the S4 bently cd for engine parts placement, such as hall sender,
ignition coils etc.and torque values for bolts etc... The S4 wiring
harness is very different. I am preity positive the Aby Ecu can run on any
aan motor, but don't quote me on that. When I picked up the motor the
engine harness was allready seperated from the engine. so I had to spend
some time labeling things since I am not quite familar with 20vT motors.
Hopefully by the end of this week I will have the V6 audi 90 climate
control wiring, and possibly sunday I will have the coupe quattro 7a
engine harness pulled and the S2 installed. But thats if I am very lucky,
and very patient right now I am working a ton. After work 5pm on till when
ever... monday to thursdays, and all day sundays are my only free times.
But it all looks plug in play for the most part I reconize just about
everything. I am hoping this will be a rather quick swap.

Cheers
Josh
--


_______________________________________________
eS2 mailing list
eS2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2