[e//S2] AAN oil pan/radiator interference...

[Andrew.Jackson at bmo.com]

That is correct Jimmy, no interference problems here.

I actually had to replace my original AAN oilpan with an OE new (don't
ask!) and I didn't have any fitment issues the second time around either.
This leands me to believe that the interference Jimmy experienced is a
result of an ever so slightly different rad setup on the 90's vs. 91's.
My Cq is a '91.

If your Cq is a '91 as well, I'd say go for it and adapt if necessary.
If it's a 90 i would further investigate any possible differences between
the two and perhaps use it as an excuse
to "upgrade" your main rad.

It's likely that it's over 12years old anyway, so why not?


Regards,

ALJ





Jimmy Pribble <Jimmy at texasbankers.com>
Sent by: es2-admin at audifans.com
11/03/2003 01:31 PM


        To:     "'Ben Nesbitt'" <soopercoop at hotmail.com>, audi fans <es2 at audifans.com>
        cc:
        Subject:        RE: [e//S2] AAN oil pan/radiator interference...


This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
> What was the deal with that?

Yeah, the angled radiator didn't bother Audi Sport.  Anyway, perhaps
because
of manufacturing tolerances, some of us have found the stock radiator to
interfere, while others haven't.  Mine interfered, but I was switching to
an
aftermarket radiator anyway, so I didn't bother trying to solve that
problem
in any other way.  Someone on the list, (JaXeN?) said he had no problem
with
interference.  I would say just give it a try and go from there.

Jimmy P.
_______________________________________________
eS2 mailing list
eS2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2