[Es2] 5 X 112 hubs for '90 coupe quattro

[Ben Nesbitt]

I tried using the Urs4 front hubs on my '93 quattro and the offset was
wrong..they also did not fit the hub carrier without machining.  The plan
was to use the URs rotors, but I ended up having to drill 5 holes in my
stock 90 rotors. Ick.  Going to investigate the A4 fronts before I spring
for S2 fronts...


Ben N

----- Original Message ----- 
From: "John Karasaki" <johkar at teleport.com>
To: "Matt twentyV" <matt_20v at yahoo.com>; "Loren Hansen"
<von_etter at hotmail.com>; <es2 at audifans.com>
Sent: Thursday, February 19, 2004 10:30 PM
Subject: Re: [Es2] 5 X 112 hubs for '90 coupe quattro


> You can also use ur-S4 (1992 through 1995.5) front hubs in the front.
This
> allows you to keep your G60 brake calipers and carriers and use the ur-S4
> brake rotors, too.  BTDT.
>
> For the rear, I'm told you can use 1996+ A4 V6 front hubs, but I haven't
> tried this yet.
>
> HTH.
>
>
>
>
> At 03:49 PM 2/19/04 -0800, Matt twentyV wrote:
>
> >--- Loren Hansen <von_etter at hotmail.com> wrote:
> > > Does anyone know where I could find some 5- lug hubs
> > > for a '90 coupe
> > > quattro?
> >
> >http://www.euro-audi-parts.com/Eurobitsspecials.html
> >
> >__________________________________
> >Do you Yahoo!?
> >Yahoo! SiteBuilder - Free web site building tool. Try it!
> >http://webhosting.yahoo.com/ps/sb/
> >_______________________________________________
> >Es2 mailing list
> >Es2 at audifans.com
> >http://www.audifans.com/mailman/listinfo/es2
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>