[Es2] 5 X 112 hubs for '90 coupe quattro

Ben Klumper bklumper at mdbworld.com
Fri Feb 20 11:05:50 EST 2004


Jimmy,

As far as I know, there is no difference in offset between the stock and S2
front hubs. Like the rears, the only difference is the bolt pattern.

Ben

----- Original Message ----- 
From: "Jimmy Pribble" <Jimmy at texasbankers.com>
To: "'John Karasaki'" <johkar at teleport.com>; "Matt twentyV"
<matt_20v at yahoo.com>; "Loren Hansen" <von_etter at hotmail.com>;
<es2 at audifans.com>
Sent: Friday, February 20, 2004 5:53 AM
Subject: RE: [Es2] 5 X 112 hubs for '90 coupe quattro


> > You can also use ur-S4 (1992 through 1995.5) front hubs in the front.
> This
> > allows you to keep your G60 brake calipers and carriers and use the
ur-S4
> > brake rotors, too.  BTDT.
>
> Agreed.  I wish I had done that instead of going with the S2 front hubs.
If
> you use the UrS4 front hubs, the entire UrS4 factory and aftermarket brake
> bin is open to you, but the S2 hubs have a different offset requiring
custom
> brackets, expensive Euro kits specifically for the S2, or the use of
> spacers.  Live and learn.  The rear S2 hubs are identical to stock in
every
> way except bolt pattern, so there is no reason not to use them (except for
> cost/availability issues).
>
> Jimmy
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>




More information about the Es2 mailing list