[Es2] 5 X 112 hubs for '90 coupe quattro

[johkar at teleport.com]

Can anyone confirm that the 200 tq front/rear (they are the same except for
the UFO front braked cars) hubs can be used in the rear on the CQ?  I have
the 200tq hubs, but haven't had the time to press them out of the housings
to take measurements.  Gathering gear for the race season (non-Audi
content) is taking up all my time!

Regards,

John

Original Message:
-----------------
From: Miller, Chris chris.miller at infofoundry.com
Date: Fri, 20 Feb 2004 11:09:37 -0500
To: bklumper at mdbworld.com, Jimmy at texasbankers.com, johkar at teleport.com,
matt_20v at yahoo.com, von_etter at hotmail.com, es2 at audifans.com
Subject: RE: [Es2] 5 X 112 hubs for '90 coupe quattro


True.  I'm using stock coupe q brakes on the front (calipers) and the S2
rotor is identical (other than bolt pattern) to the coupe rotor.

--- 
Chris Miller
Training Development
[i] The Information Foundry at Robert Bentley, Inc.
Tel: 617.528.4113
Cell: 978.844.0293
mailto:chris.miller at infofoundry.com
http://www.infofoundry.com  


-----Original Message-----
From: es2-bounces+chris.miller=infofoundry.com at audifans.com
[mailto:es2-bounces+chris.miller=infofoundry.com at audifans.com]On Behalf
Of Ben Klumper
Sent: Friday, February 20, 2004 11:05 AM
To: Jimmy Pribble; 'John Karasaki'; Matt twentyV; Loren Hansen;
es2 at audifans.com
Subject: Re: [Es2] 5 X 112 hubs for '90 coupe quattro


Jimmy,

As far as I know, there is no difference in offset between the stock and S2
front hubs. Like the rears, the only difference is the bolt pattern.

Ben

----- Original Message ----- 
From: "Jimmy Pribble" <Jimmy at texasbankers.com>
To: "'John Karasaki'" <johkar at teleport.com>; "Matt twentyV"
<matt_20v at yahoo.com>; "Loren Hansen" <von_etter at hotmail.com>;
<es2 at audifans.com>
Sent: Friday, February 20, 2004 5:53 AM
Subject: RE: [Es2] 5 X 112 hubs for '90 coupe quattro


> > You can also use ur-S4 (1992 through 1995.5) front hubs in the front.
> This
> > allows you to keep your G60 brake calipers and carriers and use the
ur-S4
> > brake rotors, too.  BTDT.
>
> Agreed.  I wish I had done that instead of going with the S2 front hubs.
If
> you use the UrS4 front hubs, the entire UrS4 factory and aftermarket brake
> bin is open to you, but the S2 hubs have a different offset requiring
custom
> brackets, expensive Euro kits specifically for the S2, or the use of
> spacers.  Live and learn.  The rear S2 hubs are identical to stock in
every
> way except bolt pattern, so there is no reason not to use them (except for
> cost/availability issues).
>
> Jimmy
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>


_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .