[Es2] new project scope (long) -need feedback

[Peter Schulz]

Guys:

I'll post some pix this weekend....

Other than the BPV and downpipe, any other specific pix you would like me 
to focus on?

I'll try to take pix on anything that I see that is different than the 200 3b.

For instance, on the S2 3b there is no valve on the crankcase breather 
routed under the IC-TB pipe.
I also did not see the heater valve ( which on the 200 is attached to the 
small coolant hose on the back of the head)
the S2 engine has most of the coolant hoses intact....

I also think that the positioning of the afterun pump is different than stock.
(Having seen the install in Matts car, I can attest that this would be alot 
of work to replace AFTER the engine install)

So I'll snap away and post the results

-Peter





At 10:27 AM 3/12/2004, you wrote:
>I would love a photo of that.  Based on previous
>conversations, I'm not the only one with a front-
>mounted BPV rubbing on the body metal just inboard
>of the pass. headlight.  I've been thinking about
>maybe putting an elbow in the plumbing and pointing
>the valve to one side or the other.
>-Matt
>
>--- Peter Schulz <pcschulz at comcast.net> wrote:
> > ben/Rick:
> >
> > The 3B S2 uses a different IC-Turbo hose than the
> > 200
> > In the case of the S2, the TBV  is pointed to the
> > passenger fender instead
> > of towards the front of the car
> >
> > -Peter
> >


Peter Schulz
1990 CQ (perpetually awaiting S2 3b engine transplant)
1991 200 20v TQW indigo mica
1991 200 20v TQW titanium grey
Chelmsford, MA USA
peter at audifans.com