[Es2] Engine Fitment
Ben Klumper
bklumper at mdbworld.com
Mon May 17 22:53:28 EDT 2004
Just a thought Andy; is the transmission mounted as well? If not, chances
are that the engine will tilt forward when the transmission is fully and
properly seated, giving a bit more room at the top-back near the battery.
Ben
----- Original Message -----
From: "Andy" <AndrewS at Columbus.rr.com>
To: "ES2" <Es2 at audifans.com>
Sent: Monday, May 17, 2004 6:33 PM
Subject: [Es2] Engine Fitment
> Has anyone put a 3B in with the stock battery position? It seems that we
> just got the engine seated on the engine mounts and the pass. Side pin in
> sitting at an extreme in the mount bracket with no room left for the
engine
> to go backwards. www.andrew.suttner.us there are some pics of it. Anyone
had
> this prob? If so solution??? TIA
>
> Andrew Suttner
>
> '91 Coupe Quattro w/3B close by
>
>
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>
More information about the Es2
mailing list