[Es2] Remote Oil Filter

[Ben Klumper]

Andy,

I believe the only issue with the oil filter housing relates to the position
of the AC compressor. If you use the CQ comp. location then you either have
to locate the filter remotely or purchase the filter housing specific to the
3B'ed S2. This is the path I chose and there aren't any issues with
clearances.

Ben

----- Original Message ----- 
From: "Andy Suttner" <andrews at columbus.rr.com>
To: "ES2" <es2 at audifans.com>
Sent: Tuesday, November 02, 2004 2:21 PM
Subject: [Es2] Remote Oil Filter


> Getting to the point where the engine is going in to the car and had a
> question about the remote oil filter. I remember someone saying that you
> have to use one because of interference with something. However, i cannot
> remember what it was that is sopposed to interfere with it. We fabbed up
the
> oil line that goes to the pan extention. So i think if that is it we could
> possibly use the stock oil filter position? Could someone help my memory
> here please? We have all the wires laid out with both the CQ and 200
> harnesses in the car with all the wires marked weather they are used or
not.
> Hopefully the wiring goes smoothly and the car will be started in less
than
> a week. Im getting excited about hearing the engine and seeing my car come
> to life after almost 2 years. TIA
>
>
> Andy
>
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>