[Es2] No radiator fan= wtf?
C1J1Miller at aol.com
C1J1Miller at aol.com
Wed Oct 13 10:01:07 EDT 2004
I agree with properly bleeding all air out of the system. Sometime it helps to take the small hose off at the overflow bottle, and raise the end up a couple feet over the motor, then pour coolant/water into that hose (on the 200; don't know the radiator setup you are using).
You can easily change the thermostat without messing with the timing belt and water pump; 2 10mm bolts. Doable with everything installed, but a pain. Better if you pull the power steering pump (or radiator). But I'd start with bleeding the hell out of the system.
Chris
More information about the Es2
mailing list