[Es2] anyone that did a 6 speed conversion, Help

[Ben Klumper]

It would be great if someone - who has gone through the experience of
installing a 6 speed in their coupe - would post a definitive list of parts
(with PN's) and procedures required to do the full conversion. Come to think
of it, the same could be done for hub conversions and brake conversions,
among other things. I would do it if I had the experience and the time, but
I haven't even had the chance to do a full write-up of my own project yet!

Ben

> Hi,
> You need the S2 6 speed transmission mounts.  On the driver's side, you
need
> a shim between the transmission subframe and the transmission mount.  Or
you
> pick up a B4 trasmission mount, this is the same subframe used on the
European
> S2.
>
> I would show you a picture, but alas the car is on the deck and I don't
have
> a lift.  Next week I could take pictures as I am doing the brakes.
>
> What are they going to do to the front axles to make them work?  The six
> speed shafts are a different length than the normal coupe shafts.
>
> Greg
>