[Es2] intercooler and oil cooler installed

[Miller, Chris]

I'm installing a similar Mocal oil cooler to Elijah's, using the stock
oil cooler lines from the 3B. Do you know offhand what adaptor is needed
to go from Audi lines to the Mocal?
Chris 

-----Original Message-----
From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
Behalf Of Elijahallen92 at aol.com
Sent: Sunday, March 06, 2005 7:38 AM
To: es2 at audifans.com
Subject: [Es2] intercooler and oil cooler installed

Hey guys, I spent the day Saturday at a friends shop working on the
coupe.  
We fit a 24x12x3 FMIC and my 19 row mocal oil cooler. It was a tight fit
but it  just made it. Here is a link to audiworld. There is a picture
with the bumber  off and another with the bumber on farther down in the
thread. I only had one  bolt in each side hand tight on the bumber so it
sags a little but it it does  fit!!
_http://forums.audiworld.com/s4s6/msgs/54669.phtml_
(http://forums.audiworld.com/s4s6/msgs/54669.phtml)
Elijah
_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2