[Es2] Shaking it up!!!!

David Kase davekase at pdqlocks.com
Tue Jan 11 15:55:04 EST 2005


Hey Ben,
Did you see the windshields on Ebay?  Somebody had a dozen or so for 
$325 each.  I don't know if you can get them otherwise.
Also, why not go for a 2.5" from Brullen?  They can make it to fit a CQ 
then you may have to have some customizing to hook it up to the 3B dp 
but that shouldn't be too hard.
Aren't you out west?

Dave

Ben Klumper wrote:

> Hey Darin,
>
> Lots of snow up here in Canada, which makes the beast that much more 
> fun to drive! Not much to report car-wise, other than I still haven't 
> got around to fixing my driver's side window. I think something broke 
> after the car was caked in ice and I tried putting the window down. 
> Grinded all the way down then wouldn't go up anymore. Eventually got 
> the window back up by pulling it a half-inch at a time. It's a bit 
> annoying, but I'm not going to tackle it until it warms up a bit. 
> Still loving the car though! Already looking forward to summer...
>
> So what's your project ETA? Do you think you'll be ready by summer?
>
> Ben
>
> PS - still on the wish-list for the nearish future: 2.75" exhaust; big 
> brake upgrade; new windshield; recharge A/C system.
>
> ----- Original Message ----- From: "Darin Adlard" <audilard at yahoo.com>
> To: <es2 at audifans.com>
> Sent: Tuesday, January 11, 2005 1:12 PM
> Subject: [Es2] Shaking it up!!!!
>
>
>> What's up fellas!!!!??
>>
>> The es2 list is dwindling.  No matter, I will press
>> forward with my project all the same! 8-)  The engine
>> is completely disconnected from all its wiring with
>> most of the independent components of the engine bay
>> removed (ie radiator, carbon cannister, air box, etc.
>> etc.) and just a few tranny bolts holding it in place.
>> I trying to locate an engine hoist to make some more
>> progress, but now tax season is starting and I have no
>> time.  To make matters worse, we found some wood rot
>> underneath the stucco of our home and the tax return
>> just got swallow by that upcoming repair bill.  I've
>> got a little $$ put away for some necessary parts as
>> well as the 034IIc I've decided to install.  I figure
>> if I'm going to mess with wiring, might as well do it
>> once and avoid any ECU shipments to and from for chip
>> upgrades.
>>
>> How is everyone?
>>
>> Darin
>>
>>
>>
>> __________________________________
>> Do you Yahoo!?
>> Take Yahoo! Mail with you! Get it on your mobile phone.
>> http://mobile.yahoo.com/maildemo
>> _______________________________________________
>> Es2 mailing list
>> Es2 at audifans.com
>> http://www.audifans.com/mailman/listinfo/es2
>>
>
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2



More information about the Es2 mailing list