[Es2] aan swap to coupe....helpppppp.

[Mark Wetzel]

No argument here.

Mark

>From: Steve Eiche <seiche at shadetreesoftware.com>
>Date: Thu Jun 16 11:29:56 CDT 2005
>To: IMAIAMI at aol.com, es2 at audifans.com
>Subject: Re: [Es2] aan swap to coupe....helpppppp.

>AAN into a CQ and cheap do not go together, unless you can do all your 
>own fabrication work and your time is not worth much.  Do your research 
>up front to save yourself money and hardship.
>
>My advice would be to go to ebay.de and search for RS2 or S2 ABY parts.  
>That will be the cheapest route.  You can also try totsteile.ch.  Tots 
>parts out RS2s and S2.   Figure about $2500 to $3k to get the parts, 
>more if you get an RS2 or S2 front bumper.  My guess is that most guys 
>that have done the 20Vt swap have about $5k into it for a "basic" swap, 
>with some spending considerably more to get it "right".  YMMV...
>
>Steve
>
>
>IMAIAMI at aol.com wrote:
>
>>hello.
>>I have an aan motor from a 95 urs4 in my 90 coupe.....
>>I didn't realize the extent up until now of the fab work and all the goodness 
>>that I am going to have to undergo........
>>do any of you know of any aan manifolds that will clear the radiator that are 
>>cheaper than the dahlback one?
>>and even with the dahlback one, or one just like it,  to what extent will I 
>>have to redirect the piping?
>>or,
>>does any one know of a way to maker her driveable for cheap?
>>thakyou...
>>dustin
>>_______________________________________________
>>Es2 mailing list
>>Es2 at audifans.com
>>http://www.audifans.com/mailman/listinfo/es2
>>
>>
>>  
>>
>_______________________________________________
>Es2 mailing list
>Es2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2